<-- nev left start -->

Foam compression hardness tester

Foam compression hardness tester
Foam compression hardness tester
Price And Quantity
  • 1
  • Unit/Units
    Product Description

    Foam Compression Hardness Tester(Hd-F750)

    The Usage:

    This Foam Compression Hardness Tester Widely Used In Various Types Of Metal,Rubber,Plastic.Leater Shoes,Clothing,Textile,Insulators,Wire And Cable,Terminals And Other Types Of Materials,Testing The Tensile,Tearing And Peeling,Compressive Strength,Bending Shear And Three Point Bending,Elongation,Sponge,Foam And Other Porous Elastic Material Of The Indentation Hardness And Compression Calculation Of Pressure Ratio And Other Physical Testing Performance.


    • Computer Control,Windows Mode Operation
    • Can Test The Elongation Rate
    • Adjustable Speed(Computer Regulation)
    The Main Parameters:
    • Capacity:Imported Force Servo Sensor 300kg(Round)
    • Speed:0.1~500mm/Min
    • Maximum Travel 1200mm(Including Fixture)
    • Load Decomposition Degree:1/250000
    • Load Accuracy:Less Than 0.5%
    • Dimensions:880*510*1490mm(L* W*H)
    • Weight:About 155kg
    • Standards:Sponge Tensile Clamp Set,Sponge Pressure Depression Pressure Plate
    • Power:1 Mv Ac 220v
    • Upper Pressure Plate:Diameter 200mm,Bottom Fillet 1mm
    • Lower Platform:380*380mm,Vent Hole Diameter 6mm,Spacing 20m
    • Maximum Travel:200mm
    • Standards:Astm 3574

    Trade Information
    • Shenzhen
    • 10-30 Per Month
    • 1 Week
    • Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
    • CE,ISO
    Contact Us

    FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan Guangdong China 86-1591-7693151
    Phone :+8615917693151