Corrosion Resistance Tester

Corrosion Resistance Tester
Corrosion Resistance Tester
Price And Quantity
  • 1
  • Set/Sets
  • 3000.00-
Product Description

Being a trustworthy manufacturer and supplier of Corrosion Resistance Tester, that is requested and appreciated for its quality and durability. The offered range of machine is adjusted to the surface treatment of different materials, including paint, electroplating, natural and inorganic covering, anode handling, anti-rust oil etc. after these against destructive treatment to test the consumption resistance of their items. This is tested and verified on various quality parameter to meet client requirement as per set industry standard. Besides, our team of experts dispatch consignment of Corrosion Resistance Tester on time for timely delivery.

Standard Parameters :



Internal Size (LWH)


External Size (LWH)


Equipment Material

Both inside & outside shell adopt P.V.C rigid plastic board

Temperature Range

Room temperature ~ 55oC

Temperature Fluctuations


Temperature Uniformity


Temperature Precision


Spraying method

Continuous and Periodic spray type

Test Chamber Temperature

Salt Spray Method (NSS ACSS)35+1oC

Corrosion-resistant Testing Method (CASS) 50+1oC

Saturated air Barrel Temperature

Salt Spray Method (NSS ACSS)47+1oC

Corrosion-resistant Testing Method (CASS) 63+1oC

Brine Temperature


Spray Quantity

1.0~2.0 ml / 80cm2 / hr

PH value

Salt Spray Method (NSS ACSS6.5~7.2)

Corrosion-resistant Testing Method(CASS)3.0~3.2

Lab Volume


Brine Tank Capacity


Multiple Safety Protection Devices

Current discharge protection, over pressure protection, over temperature protection, over load fuse protection


Testing Salt/ Measuring tank/Nozzle Equipment x 1 set

Air source

1HP Air pump (provided by buyer)

Product Features :

  • Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
  • Reservoirs with mixing system on stand.
  • Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
  • Exposure zone lined with corrosion-resistant PVC sheets.
  • Clear cover allows viewing of test conditions.
  • Peaked cover prevents dripping of condensation onto samples.
  • Water seal and water level protection system.
  • Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
  • Automatic DI water fills to humidifying tower.
  • Digital temperature control.
  • Integral over-protection on heaters.
  • Low water cut-off protection on humidifying tower.

Method of operation

  • The salt spray chamber internal parts: tower spray device, funnel, rod, V-type sample holder installed.
  • Connected to the gas supply, the power is turned on, turn on the power switch.
  • In the pressure tank and cabinets add water, two low level light exterminate stop adding water, at the water seal groove seal.
  • Purified water and sodium chloride salt in a ratio of 1:20 with a good. The solution was poured into the reagent with a good entrance (low saline to exterminate a lamp).
  • We can open all the lamps burn out operation, spray, time switch, switch demisting before opening end of the test.
  • According to the test requirements for equipment and cycles for continuous spraying mode (continuous spray T1, T2 tables are all set to 0, T1 is set to intermittent spray working time, T2 is time to rest).

Precautions :

  • Regular cleaning and maintenance of salt spray chamber pressure tank, brine tank nozzle.
  • Do not pressure sodium chloride solution from the barrel manually add water poured out, the first transfer solution within the cylinder and then further cleaned with distilled water.
  • Do not test the exhaust pipe behind the blockage, in order to avoid too much pressure to make the cabinets housing deformation.
  • Do not put inflammable and explosive materials inside.
  • Salt spray chamber behind the pressure gauge is 2 kg, 1 kg in front, factory in Wuhan still test test Equipment Co., Ltd. has designed, do not tamper with.
  • 6, spray amount is less than set the spray tower to increase, reduce excessive spray spray tower (spray amount collected standard is 1 ~ 2ml / h, takes in 16-hour average)

Other Details :




15 days after order.








Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.


L/C, D/P, T/T



Trade Information
  • 1-10 Sets Per Month
  • 30 Days
    Related Products
    UV Weathering Test Chamber

    Send Inquiry
    Environmental Test Chamber With Programmable

    Send Inquiry
    Knives Bending Strength Tester

    Send Inquiry
    Bursting Strength Tester

    Send Inquiry
    Low Temperature Flexing Tester

    Send Inquiry
    right arrow
    left arrow
    Contact Us

    FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town,  Dongguan  Guangdong  China  86-1591-7693151
    Phone :+8618236912012