Corrosion Resistance Tester

Corrosion Resistance Tester
Corrosion Resistance Tester
Price And Quantity
  • 1
  • Unit/Units
    Product Description

    Corrosion Resistance Tester

    Corrosion Resistance Tester adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.suitable for parts, electronic components, metal materials, protective coatings and industrial products.

    Standard Parameters


    HD E808 60     

    Internal Size (L W H)

    600 400 450mm

    External Size (L W H)

    1070 600 1180mm

    Equipment Material

    Both inside & outside shell adopt P.V.C rigid plastic board

    Temperature Range

    Room temperature   55C

    Temperature Fluctuations


    Temperature Uniformity


    Temperature Precision


    Spraying method

    Continuous and Periodic spray type

    Test Chamber Temperature

    Salt Spray Method (NSS ACSS)35 1C

    Corrosion-resistant Testing Method (CASS) 50 1C

    Saturated air Barrel Temperature

    Salt Spray Method (NSS ACSS)47 1C

    Corrosion-resistant Testing Method (CASS) 63 1C

    Brine Temperature

    35 C 1C

    Spray Quantity

    1.0 2.0 ml / 80cm2 / hr

    PH value

    Salt Spray Method (NSS ACSS6.5 7.2)

    Corrosion-resistant Testing Method(CASS)3.0 3.2

    Lab Volume


    Brine Tank Capacity


    Multiple Safety Protection Devices

    Current discharge protection, over pressure protection, over temperature protection, over load fuse protection


    Testing Salt/ Measuring tank/Nozzle Equipment x 1 set

    Air source

    1HP Air pump (provided by buyer)


    Experiment method:


    • GB / T2423.17-2008   salt spray test method
    • GB / T 2423.18-2000   basic procedures for electric and electronic products Test Ka
    • GB / T10125-1997     Corrosion tests in artificial atmospheres - salt spray test 
    • GB10593.2-1990       electric and electronic products environmental parameters measurements
    • GB / T1765-1979      Determination of resistance to heat, salt spray, weather resistance (artificial acceleration) of the film test
    • GB / T1771-2007      Paints and varnishes - Determination of resistance to neutral salt spray
    • GB / T12967.3-2008  auminum and anodized aluminum alloy film detection method
    • GB / T5170.8-2008    and IEC, MIL, DIN, ASTM and other standards equivalent to


    Product Features

    • Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
    • Reservoirs with mixing system on stand.
    • Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
    •  Exposure zone lined with corrosion-resistant PVC sheets.
    • Clear cover allows viewing of test conditions.
    • Peaked cover prevents dripping of condensation onto samples.
    • Water seal and water level protection system.
    • Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
    • Automatic DI water fills to humidifying tower.
    • Digital temperature control.
    • Integral over-protection on heaters.
    •  Low water cut-off protection on humidifying tower


    Trade Information
    • 10-30 Per Month
    • 1 Week
      Related Products
      Constant Temperature Humidity Test Chambers

      Send Inquiry
      Knives Bending Strength Tester

      Send Inquiry
      Corrosion Resistance Tester

      Send Inquiry
      Anti-yellowing aging testing machine

      Send Inquiry
      Temperature Humidity Environment Test Chamber

      Send Inquiry
      HDT Vicat tester

      Send Inquiry
      right arrow
      left arrow
      Contact Us

      FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town,  Dongguan  Guangdong  China  86-1591-7693151
      Phone :+8618236912012