- 1
- Set/Sets
- 6800.00-
Description:
High low temperature tensile strength tester, leather,tape, film and other kind of materials with high low temperature environment.
This tensile test equipment Applications(tensile testing):
- Load under defined deformation: Test load under defined deformation of tested sample
- Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.
- This machine can do different test as per customer requirement such as peel test, tear test, compression test, bend test with different clamps.
Design Standard(inculding but not limited to...):
- ASTM D882 ASTM D 638 / ISO 527-1/2
- Bend Test ISO-178 / ASTM D 790
- Tear Test ASTM D 624
- Peel Test : ASTM D 3330
- Compression Test : ASTM D 659
- others...
Specification:
Tensile Parts Standard Features:
Item
Description | |
Max. Force | 50KN |
Load cell | Germany brand load cell for high accuracy |
Control system | PC with windows 7 system |
Motor | Panasonic servo motor w/DC variable speed drive system, high-precision mechanical ball screw rod |
Force reading | kgf, Ibf, N, KN, T etc |
Stoke | 1300mm including fixture |
Load cell Resolution | 1/100,000 |
Load Precision | within 0.5% |
Test speed | 0.01~300mm/min (adjustable) |
Software | TM 2101 |
Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc |
Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
HD-609/604 | 2000 kg (20KN)Max. Force / for Tape, rubber, plastic, textile, waterproof material, wire and cable, net rope, wire, metal rod, fiber, metal chain, metal plate and other materials |
HD-611 | 10T (100KN) Max. Force / for waterproof material, wire and cable, net rope, wire, metal rod, fiber, metal chain, metal plate and other materials |
HD-615 | 5000 kg (50KN) Max. Force / for textile, waterproof material, wire and cable, net rope, wire, metal rod, fiber, metal chain, metal plate and other materials |
HD-B616 | 20KN-1000KN (Hydraulic) load range / for waterproof material, wire and cable, net rope, wire, metal rod, fiber, metal chain, metal plate and other materials |
Tensile Software:
software is designed purposely for computer controlled electronic universal testing machine, used for tension, compress, bend, shear, tearing and peel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.
Chamber Standard Features
Specification |
|
Internal dimension | (W*D*H) 400*700*400mm |
Temperature range | -40~+150 |
Temperature Accuracy | 1 |
Humidity accuracy | 3%R.H |
Cooling speed | 1/min in average (without loading) |
Heating speed | 2/min in average (without loading) |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Cooling method | Air cooling |
Controller | Korea TEMI 880 controller LCD touch screen, programmable control temperature and humidity Can set different parameter for cyclic test |
Insulation material | 50mm high density rigid Polyurethane foam |
Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
Compressor | France Tecumseh compressor |
Lighting | Heat resistance |
Temperature sensor | PT-100 dry and wet bulb sensor |
Observation window | Tempered glass |
Testing hole | Diameter 50mm, for cable outing |
Safety protection device | Protection for leakage Over-temperature Compressor overvoltage and overload Heater short circuit Water shortage |
Applications(environment testing):
- To simulate test environment with different temperature
- Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test
- Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
- Uncover test unit weakness in a short-term test with accelerated time effect
Chamber Design Features:
- High performance and quiet operation (68 dBA)
- Space-saving designed for flush installation to wall
- Full thermal break around doorframe
- One 50mm diameter cable port left, with flexible silicone plug
- Direct water supply connection for continuous operation
- Accurate wet/dry-bulb humidity measurement system for easy maintain
Programmable Controller:
- 1PIC controller for test chamber
- Step types include: ramp, soak, jump, auto-start, and end
- RS-232 interface to connect computer for output
- 10-30 units Per Month
- 1 Week
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan Guangdong China 86-1591-7693151
Phone :+8618236912012