Incline impact tester HD-A523
This machine is only one which perform the ISTA test standard requirement for incline impact and horizontal impact,and combine with shock absorbing and anti bouncing to greatly reduce the echo when impact and reduce the secondary impact for sample.
- Flexible positioning and electric trolley. It is easy to fix and achieve the changeable value of speed.
- The height of trolley is relatively low so that is easy to fix the specimen; the strong impact resistance board can guarantee the fastness of the structure.
- The trolley can be adjusted to be horizontal in order to fix the specimen for customer. The angle adjustment is driven by air cylinder which is flexible and convenient.
- In order to keep the test staff completely safe, the tester is with remote control function.
- Before testing, the customer only needs to fix the tester on the ground when stalling it, no other complicated operation.
100kg-600kg (can be customized)
Impact surface dimension
1600*2200mm,2100*2400mm (can be customized)
Rolling carriage table dimension
1220*1220mm (can be customized)
Touch screen controller
Max. slide length
2200mm (can be customized)
Plane inclined to the vertical angle
0ÃÂ°, 15ÃÂ°(can be customized)
Impact surface material
Rubber wood with two-rail steel track
Temperature 0~40ÃÂ°, humidity Ã¢â°Â¤80% (no condensation)
Upper and lower limit switches
Load sensor with automatic retreat
- 10-30 Units Per Month
- 1 Week
- Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Jintang Industrial Zone, Dongshen Heng Road, Tangxia Town, Dongguan Guangdong China