PP and PE Melt Flow testing machine
- Melt Flow testing
Melt Flow Indexer is used to determine melt-mass flow rate .
High quality,melt indexer
Melt Flow testing for PP and PE
- Melt index tester is used to determine melt-mass flow rate (MFR).
- High quality,melt indexer
Main parameters of machine:
- Testing range: 0.1-800.00g/10min (MFR) & 0.1-800.00 cm3/10min(MVR)
- Temperature range: Room temperature~400°C
- Displacement accuracy: 0.01mm
- Standard loads: 325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g
- Combination load: 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g
- Material cutting method: Manual, timing and automatic cutting (optional)
- Time setting: 0.1~999.9min
- Cylinder: Diameter 9.5504±0.0076mm
- CE certificate, Quality certificate are included
Melt Mass-Flow Rate (MFR) & Melt Volume Rate (MVR) For Raw Material
ISO 1133 – Determination of the melt mass-flow rate (MFR) and melt volume rate (MVR) of thermoplastics
ASTM D 1238-Standard Test Method for Melt Flow Rates of thermoplastics by extrusion plastometer
Measurement of Quality; rubber and plastics; universities; research laboratories; commodity inspection arbitration, technical supervision departments; petrochemicals; other industries.
- Shenzhen China
- Cash Against Delivery (CAD), Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque, Days after Acceptance (DA), Delivery Point (DP), Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C), Telegraphic Transfer (T/T), Western Union, Paypal, Others
- 150 Per Month
- 15 days after received the order Week
- Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
- Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
Jintang Industrial Zone, Dongshen Heng Road, Tangxia Town Dongguan Guangdong China