<-- nev left start -->

Programmable Thermal Shock Chamber

Programmable Thermal Shock Chamber
Programmable Thermal Shock Chamber
Price And Quantity
  • 1
  • Set/Sets
  • 3000.00-
Product Description

Product Introduction:

Environment Thermal Shock Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.

The Environment Thermal Shock Chamber is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB…


  • Perfect appearance and easy to operate.
  • Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
  • Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.
  •  Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
  • Control interface will display alarm reason and provide check methods, machine has emergency stop button.
  • Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.
  • With RS-232C communication port for connecting PC to control, record and save test report.

Main parameters:

Test method

Pneumatic operated door switch 3 chambers

Inner dimension (W*D*H)


External dimension (W*D*H)


Temperature range

-40 ~ +80℃

High temperature chamber pre-heating range

60 ~ 100℃

Heating speed

+60→+100℃ about 10 minutes

Low temperature chamber pre-cooling range

-65 ~ 0

Cooling speed

Ambient →-65℃ about 65 minutes

Temperature deviation


Thermal recovery time

Within 5 minutes

External material

Antirust processing cold-rolled steel sheet

Internal material

SUS#304 stainless steel

Thermal insulation material

Polyurethane foam and fiberglass


R404A / R23

Cooling method

Air cooling


0.2 - 0.5Mpa

Power supply

Three phase, 380V, 50Hz

High temperature chamber:

  • Heater: NI-CR alloy electric heater
  • Draught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan.


Low temperature chamber:

  • Cooler: Fin cooler, regenerator
  • Draught fan: centrifugal fan


Drive device:

  • Pneumatic cylinder: Drive the air door of high, environmental, low temperature
  • Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)


Refrigerating device:

  • Cooling method: mechanical compression refrigeration
  • Refrigeration compressor:  Semi-closed piston
  • Refrigerant: R23/R404A
  • Condensation: Stainless steel welded plate heat exchanger



  • Operate interface: 6" color LCD touch screen
  • Program memory capacity: 100 groups (modify by operator)
  • Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 999 cycles
  • Resolution: temperature: 0.01 ℃; time: 1 minute
  • Input: T thermocouple
  • Control method: P.I.D control


Trade Information
  • 1-10 Sets Per Month
  • 30 Days
    Contact Us

    FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan Guangdong China 86-1591-7693151
    Phone :+8618236912012