Tear strength tester pointer type) HD-A801
- Accurate, low-cost and high quality
- Suitable for fabrics and textile
- ISO 1974
Tear Strength Tester are accurate, low-cost and high quality falling pendulum tear testing Instruments with analog display for the determination of the average force required to propagate a single-rip tongue-type tear starting from a cut in paper, cardboard, plastics, non-woven and woven fabrics, with proper configuration.
Tear Strength Tester meeting ASTM standards is suitable for most fabrics including woven, layered blankets, napped pile, blanket, and air bag fabrics, and provided the fabric does not tear in the direction crosswise to the direction of the force application during the test. The fabrics may be untreated, heavily sized, coated, resin-treated, or otherwise treated. This test method covers the measurement of the average force required to propagate a single-rip tear starting from a cut in a non-woven fabric using a falling-pendulum (Elmendorf) apparatus.
Paper Tear Strength Tester
The scope of tear strength
A: 0~32N(By installing a small hammer )
B: 0~64N(Significant increase in heavy hammer to install )
Two gripper sizes
50 x 60mm
460(L) x 240(W) x 420(H)mm
- 10-30 Per Month
- 1 Week
- Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan Guangdong China 86-1591-7693151